Grub Screws DIN 6332 with thrust point
EH 22540.
Grub screws are clamping screws that can directly transmit forces via the thrust point. The pressure surface of the thrust point of the steel version is hardened.
For clamping sensitive surfaces, thrust pads EH 22560. (DIN 6311 and low version) can be attached on the thrust point. The snap ring of the thrust pad achieves a connection between the grub screw and the thrust pad that can be released by hand.
These grub screws with thrust points are particularly characterised by the additional radius "r" on the thrust point (optimisation compared to DIN 6332), which makes assembly in the thrust pad much easier.
The thrust point diameter of the grub screws is smaller than the core diameter of the thread, so that they can also be screwed in on the pin side.
Your selection resulted in 60 hits
Version
Material
picture
d1 [mm]
l1 [mm]
More details
Article-No.
CAD / Documents
Price
[€]
Available
Version:
slotted (S)
Material:
Stainless steel
picture:
1
d1 [mm]:
M16
l1 [mm]:
80 mm
Article-No.:
22540.1161
- slotted (S) – picture 1, Stainless steel
- d1: M16
- l1: 80 mm
- d2 h11: 12 mm
- d3: 11 mm
- l2: 12 mm
- l3: 5 mm
- l4: ~ 85.4 mm
- l5: 82.9 mm
- n: 2.5 mm
- Weight: 100 g
Version:
slotted (S)
Material:
Stainless steel
picture:
1
d1 [mm]:
M16
l1 [mm]:
100 mm
Article-No.:
22540.1162
- slotted (S) – picture 1, Stainless steel
- d1: M16
- l1: 100 mm
- d2 h11: 12 mm
- d3: 11 mm
- l2: 12 mm
- l3: 5 mm
- l4: ~ 105.4 mm
- l5: 102.9 mm
- n: 2.5 mm
- Weight: 124 g
Version:
slotted (S)
Material:
Stainless steel
picture:
1
d1 [mm]:
M16
l1 [mm]:
125 mm
Article-No.:
22540.1163
- slotted (S) – picture 1, Stainless steel
- d1: M16
- l1: 125 mm
- d2 h11: 12 mm
- d3: 11 mm
- l2: 12 mm
- l3: 5 mm
- l4: ~ 130.4 mm
- l5: 127.9 mm
- n: 2.5 mm
- Weight: 160 g
Version:
slotted (S)
Material:
Stainless steel
picture:
1
d1 [mm]:
M20
l1 [mm]:
100 mm
Article-No.:
22540.1201
- slotted (S) – picture 1, Stainless steel
- d1: M20
- l1: 100 mm
- d2 h11: 15.5 mm
- d3: 14.4 mm
- l2: 14 mm
- l3: 5.5 mm
- l4: ~ 105.5 mm
- n: 3 mm
- Weight: 190 g
Version:
slotted (S)
Material:
Stainless steel
picture:
1
d1 [mm]:
M20
l1 [mm]:
125 mm
Article-No.:
22540.1202
- slotted (S) – picture 1, Stainless steel
- d1: M20
- l1: 125 mm
- d2 h11: 15.5 mm
- d3: 14.4 mm
- l2: 14 mm
- l3: 5.5 mm
- l4: ~ 130.5 mm
- n: 3 mm
- Weight: 240 g
Version:
slotted (S)
Material:
Stainless steel
picture:
1
d1 [mm]:
M20
l1 [mm]:
150 mm
Article-No.:
22540.1203
- slotted (S) – picture 1, Stainless steel
- d1: M20
- l1: 150 mm
- d2 h11: 15.5 mm
- d3: 14.4 mm
- l2: 14 mm
- l3: 5.5 mm
- l4: ~ 155.5 mm
- n: 3 mm
- Weight: 290 g
Version:
with internal hexagon (IS)
Material:
Steel, blackened, quality 5.8, thrust point hardened
picture:
2
d1 [mm]:
M6
l1 [mm]:
30 mm
Article-No.:
22540.0361
- with internal hexagon (IS) – picture 2, Steel
- d1: M6
- l1: 30 mm
- d2 h11: 4.5 mm
- d3: 4 mm
- l2: 6 mm
- l3: 2.5 mm
- l4: ~ 32.1 mm
- WS: 3 mm
- Weight: 4.3 g
Version:
with internal hexagon (IS)
Material:
Steel, blackened, quality 5.8, thrust point hardened
picture:
2
d1 [mm]:
M6
l1 [mm]:
50 mm
Article-No.:
22540.0362
- with internal hexagon (IS) – picture 2, Steel
- d1: M6
- l1: 50 mm
- d2 h11: 4.5 mm
- d3: 4 mm
- l2: 6 mm
- l3: 2.5 mm
- l4: ~ 52.1 mm
- WS: 3 mm
- Weight: 7.6 g
Version:
with internal hexagon (IS)
Material:
Steel, blackened, quality 5.8, thrust point hardened
picture:
2
d1 [mm]:
M8
l1 [mm]:
40 mm
Article-No.:
22540.0381
- with internal hexagon (IS) – picture 2, Steel
- d1: M8
- l1: 40 mm
- d2 h11: 6 mm
- d3: 5.4 mm
- l2: 7.5 mm
- l3: 3 mm
- l4: ~ 43 mm
- l5: ~ 42.5 mm
- WS: 4 mm
- Weight: 11 g
Version:
with internal hexagon (IS)
Material:
Steel, blackened, quality 5.8, thrust point hardened
picture:
2
d1 [mm]:
M8
l1 [mm]:
60 mm
Article-No.:
22540.0382
- with internal hexagon (IS) – picture 2, Steel
- d1: M8
- l1: 60 mm
- d2 h11: 6 mm
- d3: 5.4 mm
- l2: 7.5 mm
- l3: 3 mm
- l4: ~ 63 mm
- l5: ~ 62.5 mm
- WS: 4 mm
- Weight: 17 g
Version:
with internal hexagon (IS)
Material:
Steel, blackened, quality 5.8, thrust point hardened
picture:
2
d1 [mm]:
M10
l1 [mm]:
60 mm
Article-No.:
22540.0401
- with internal hexagon (IS) – picture 2, Steel
- d1: M10
- l1: 60 mm
- d2 h11: 8 mm
- d3: 7.2 mm
- l2: 9 mm
- l3: 4.5 mm
- l4: ~ 63.6 mm
- l5: ~ 62.6 mm
- WS: 5 mm
- Weight: 26 g
Version:
with internal hexagon (IS)
Material:
Steel, blackened, quality 5.8, thrust point hardened
picture:
2
d1 [mm]:
M10
l1 [mm]:
80 mm
Article-No.:
22540.0402
- with internal hexagon (IS) – picture 2, Steel
- d1: M10
- l1: 80 mm
- d2 h11: 8 mm
- d3: 7.2 mm
- l2: 9 mm
- l3: 4.5 mm
- l4: ~ 83.6 mm
- l5: ~ 82.6 mm
- WS: 5 mm
- Weight: 36 g
Version:
with internal hexagon (IS)
Material:
Steel, blackened, quality 5.8, thrust point hardened
picture:
2
d1 [mm]:
M12
l1 [mm]:
60 mm
Article-No.:
22540.0421
- with internal hexagon (IS) – picture 2, Steel
- d1: M12
- l1: 60 mm
- d2 h11: 8 mm
- d3: 7.2 mm
- l2: 10 mm
- l3: 4.5 mm
- l4: ~ 64.6 mm
- l5: ~ 62.6 mm
- WS: 6 mm
- Weight: 36 g
Version:
with internal hexagon (IS)
Material:
Steel, blackened, quality 5.8, thrust point hardened
picture:
2
d1 [mm]:
M12
l1 [mm]:
80 mm
Article-No.:
22540.0422
- with internal hexagon (IS) – picture 2, Steel
- d1: M12
- l1: 80 mm
- d2 h11: 8 mm
- d3: 7.2 mm
- l2: 10 mm
- l3: 4.5 mm
- l4: ~ 84.6 mm
- l5: ~ 82.6 mm
- WS: 6 mm
- Weight: 51 g
Version:
with internal hexagon (IS)
Material:
Steel, blackened, quality 5.8, thrust point hardened
picture:
2
d1 [mm]:
M12
l1 [mm]:
100 mm
Article-No.:
22540.0423
- with internal hexagon (IS) – picture 2, Steel
- d1: M12
- l1: 100 mm
- d2 h11: 8 mm
- d3: 7.2 mm
- l2: 10 mm
- l3: 4.5 mm
- l4: ~ 104.6 mm
- l5: ~ 102.6 mm
- WS: 6 mm
- Weight: 117 g
Version:
with internal hexagon (IS)
Material:
Steel, blackened, quality 5.8, thrust point hardened
picture:
2
d1 [mm]:
M16
l1 [mm]:
80 mm
Article-No.:
22540.0461
- with internal hexagon (IS) – picture 2, Steel
- d1: M16
- l1: 80 mm
- d2 h11: 12 mm
- d3: 11 mm
- l2: 12 mm
- l3: 5 mm
- l4: ~ 85.4 mm
- l5: 82.9 mm
- WS: 8 mm
- Weight: 91 g
Version:
with internal hexagon (IS)
Material:
Steel, blackened, quality 5.8, thrust point hardened
picture:
2
d1 [mm]:
M16
l1 [mm]:
100 mm
Article-No.:
22540.0462
- with internal hexagon (IS) – picture 2, Steel
- d1: M16
- l1: 100 mm
- d2 h11: 12 mm
- d3: 11 mm
- l2: 12 mm
- l3: 5 mm
- l4: ~ 105.4 mm
- l5: 102.9 mm
- WS: 8 mm
- Weight: 119 g
Version:
with internal hexagon (IS)
Material:
Steel, blackened, quality 5.8, thrust point hardened
picture:
2
d1 [mm]:
M16
l1 [mm]:
125 mm
Article-No.:
22540.0463
- with internal hexagon (IS) – picture 2, Steel
- d1: M16
- l1: 125 mm
- d2 h11: 12 mm
- d3: 11 mm
- l2: 12 mm
- l3: 5 mm
- l4: ~ 130.4 mm
- l5: 127.9 mm
- WS: 8 mm
- Weight: 154 g
Version:
with internal hexagon (IS)
Material:
Steel, blackened, quality 5.8, thrust point hardened
picture:
2
d1 [mm]:
M20
l1 [mm]:
100 mm
Article-No.:
22540.0501
- with internal hexagon (IS) – picture 2, Steel
- d1: M20
- l1: 100 mm
- d2 h11: 15.5 mm
- d3: 14.4 mm
- l2: 14 mm
- l3: 5.5 mm
- l4: ~ 105.5 mm
- WS: 10 mm
- Weight: 178 g
Version:
with internal hexagon (IS)
Material:
Steel, blackened, quality 5.8, thrust point hardened
picture:
2
d1 [mm]:
M20
l1 [mm]:
125 mm
Article-No.:
22540.0502
- with internal hexagon (IS) – picture 2, Steel
- d1: M20
- l1: 125 mm
- d2 h11: 15.5 mm
- d3: 14.4 mm
- l2: 14 mm
- l3: 5.5 mm
- l4: ~ 130.5 mm
- WS: 10 mm
- Weight: 230 g
Version:
with internal hexagon (IS)
Material:
Steel, blackened, quality 5.8, thrust point hardened
picture:
2
d1 [mm]:
M20
l1 [mm]:
150 mm
Article-No.:
22540.0503
- with internal hexagon (IS) – picture 2, Steel
- d1: M20
- l1: 150 mm
- d2 h11: 15.5 mm
- d3: 14.4 mm
- l2: 14 mm
- l3: 5.5 mm
- l4: ~ 155.5 mm
- WS: 10 mm
- Weight: 284 g
Version:
with internal hexagon (IS)
Material:
Stainless steel
picture:
2
d1 [mm]:
M6
l1 [mm]:
30 mm
Article-No.:
22540.1361
- with internal hexagon (IS) – picture 2, Stainless steel
- d1: M6
- l1: 30 mm
- d2 h11: 4.5 mm
- d3: 4 mm
- l2: 6 mm
- l3: 2.5 mm
- l4: ~ 32.1 mm
- WS: 3 mm
- Weight: 4.3 g
Version:
with internal hexagon (IS)
Material:
Stainless steel
picture:
2
d1 [mm]:
M6
l1 [mm]:
50 mm
Article-No.:
22540.1362
- with internal hexagon (IS) – picture 2, Stainless steel
- d1: M6
- l1: 50 mm
- d2 h11: 4.5 mm
- d3: 4 mm
- l2: 6 mm
- l3: 2.5 mm
- l4: ~ 52.1 mm
- WS: 3 mm
- Weight: 7.6 g
Version:
with internal hexagon (IS)
Material:
Stainless steel
picture:
2
d1 [mm]:
M8
l1 [mm]:
40 mm
Article-No.:
22540.1381
- with internal hexagon (IS) – picture 2, Stainless steel
- d1: M8
- l1: 40 mm
- d2 h11: 6 mm
- d3: 5.4 mm
- l2: 7.5 mm
- l3: 3 mm
- l4: ~ 43 mm
- l5: ~ 42.5 mm
- WS: 4 mm
- Weight: 11 g
Material
- Steel, blackened, quality 5.8, thrust point hardened
- Stainless steel
Further products
Please select a variant (article number in the order table tab) for complete and detailed compliance information.