2B150.1126 - Lateral Plunger
smooth, with seal, with female thread - INCH
To be used for positioning and applying pressure, e.g. during painting and sandblasting.
Sealed against chips and dirt.
This article 2B150.1126 - Lateral Plunger smooth, with seal, with female thread - INCH / Standard spring load (d1: 7/16 in, d2: #8-32, Spring load F max.1: ~ 16.9 lb) is one variant of the article group Lateral Plungers smooth, with seal, with female thread - INCH (EH 2B150.)
- Standard spring load
- d1: 7/16 in
- d2: #8-32
- Spring load F max.1): ~ 16.9 lb
- d3 +0.008: 0.248 mm
- l1 -0.08: 0.43 in
- l2: 0.295 in
- l3: 0.177 in
- l4: 0.063 in
- Stroke s: 0.079 in
- Location hole D H8: 7/16 in
- Operating temperature range max.: 230 °F
- Weight: 0.094 oz
for lateral plungers, smooth
d1: 10 mm
- assembly tool
- d1: 10 mm
- Weight: 49 g
Material
Seal
- CR
Body
- Aluminium AI
Threaded washer
- Steel, blackened
Spring
- Steel, blackened
Notes
Individual set screws can be screwed in the plate with threaded hole.
Characteristic
Version standard spring load = spring from steel, blackened
Assembly
Formula for calculating the center distance for the mounting hole:
l0 = z/2 + w + x,
l0 = center distance,
y = workpiece height,
w = workpiece length,
x = stroke,
z = stop diameter
Calculation dimension x for workpieces:
x = d2/2 - s
Installation by pressing in.
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863.
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 27.06.2024.
Does not contain Proposition 65 substances
No Proposition 65 substances included.
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.