22060.0448 - Spring Plunger
with internal hexagon and seal
Spring plungers can be used for locating or for applying pressure, as a detent or for ejection.
By means of the seal, liquid cannot penetrate into the spring plunger.
This article 22060.0448 - Spring Plunger with internal hexagon and seal / stainless steel, standard spring load (d1: M8) is one variant of the article group Spring Plungers with internal hexagon and seal (EH 22060.)
More details
- stainless steel, standard spring load
- d1: M8
- d2: 3.8 mm
- l: 26 mm
- n: 1.5 mm
- t: 1.4 mm
- WS: 2.5 mm
- Stroke s: 3 mm
- Spring load1) F1: ~ 9 N
- Spring load1) F2: ~ 24 N
- Operating temperature range min.: -30 °C
- Operating temperature range max.: 80 °C
- Weight: 6.8 g
for spring plungers
d1: M8
- Assembly Tool for mounting via slot (pin sided)
- d1: M8
- b: 60 mm
- d: 6.45 mm
- l: 70 mm
- Weight: 39 g
Material
Pin
- Stainless steel 1.4305
Seal
- NBR
Body
- Stainless steel 1.4305
Spring
- Stainless steel
Notes
Special types on request.
Spring plungers are specially tested for spring range and forces.
References
Compared to EH 22060., i.e. "no seal", there are deviations in dimension l, spring load and temperature range.
Thread lock on request, please refer to appendix - Technical Data -
Characteristic
Standard spring load: no marking
Assembly
Spring plungers can be mounted and removed by means of the slot or internal hexagon.
Please use a special assembly tool for mounting with a slot (pin side).
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863.
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 27.06.2024.
Does not contain Proposition 65 substances
No Proposition 65 substances included.
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.