23210.0501 - Down-Hold Clamps
without clamping lever
By tightening the ball-ended thrust screw the workpiece is simultaneously pressed towards the stops and fixture plate. The favourable leverage enables high horizontal clamping forces. When using T-Nuts EH 23010. / EH 23020. (DIN 508) they can also be applied to other slot sizes.
This article 23210.0501 - Down-Hold Clamps without clamping lever / with flat clamping jaw (T-slot size: 10 mm, d1: M8) is one variant of the article group Down-Hold Clamps without clamping lever (EH 23210.)
- with flat clamping jaw – picture 1
- T-slot size: 10 mm
- d1: M8
- d2: 8.4 mm
- b: 32 mm
- h1: 24 mm
- h2: 20 mm
- h3: 8 mm
- l1: 52 mm
- l2: 28 mm
- s: 3 mm
- Clamping force horizontal max.: 7 kN
- Tightening torque max.: 3 Nm
- Weight: 265 g
Material
- Steel, case-hardened, blackened, ground
RoHS compliant
Contains lead - compliant according to exceptions 6a / 6b / 6c.
Contains SVHC substances >0,1% w/w
Contains lead - SVHC list [REACH] as of 27.06.2024.
Contains Proposition 65 substances
Lead can cause cancer and reproductive harm from exposure
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.