Locators with bore hole, for spring plungers
EH 22020.
Locators can be used as a counterpart for all spring plungers with ball. They enable the locking, latching and positioning of the respective workpiece.
These locators with bore hole have 90° notches on all four side surfaces (2x horizontal and 2x vertical to the mounting direction). Thanks to the hardened material, the locators are low-wear and particularly suitable for applications with many repeat cycles.
Your selection resulted in 2 hits
More details
- b2 ±0.1: 3.4 mm
- d1: 4.3 mm
- d2: 8 mm
- d3 H12: 2 mm
- d4: 4.5 mm 5.0 mm
- a: 0.7 mm
- b1: 15 mm
- b3 ±0.05: 3.5 mm
- h1: 8.5 mm
- h2: 4.6 mm
- l1: 15 mm
- l2 ±0.05: 5 mm
- For cylinder screw DIN 912: M4
- Weight: 10 g
- b2 ±0.1: 4.5 mm
- d1: 4.3 mm
- d2: 8 mm
- d3 H12: 2 mm
- d4: 6.0 mm 6.5 mm
- a: 1 mm
- b1: 15 mm
- b3 ±0.05: 3.5 mm
- h1: 10.5 mm
- h2: 4.6 mm
- l1: 15 mm
- l2 ±0.05: 5 mm
- For cylinder screw DIN 912: M4
- Weight: 11 g
Material
- Sintered steel, case-hardened
Assembly
We recommend spring plungers with reinforced or heavy spring load. Please consider the insertion depth of the ball (dimension a) into the locator during installation.
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863.
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 27.06.2024.
Does not contain Proposition 65 substances
No Proposition 65 substances included.
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.