GARDENING AND LANDSCAPING

Laying slabs that break easily is a tricky endeavour. Before you know it, a slab shatters, causing not only additional cost but also unnecessary delays. The solution Halder offers to this problem is the SIMPLEX soft-face mallet with its extra lightweight aluminium housing, as it lets the user dose the impact force and apply it in a targeted manner. Despite the reduced weight of the hammer, the 60 mm diameters of the insert provides for a large impact surface. Available are inserts with different levels of impact strength: TPE-soft (blue, soft), TPE-mid (grey, medium hard), and Superplastic (white, for increased impact force). All three inserts are non-marring and will not leave behind any undesired black stripes!

The choice is clear: either you burden yourself with a cheap rubber mallet that you constantly have to replace or you spring for the best tool and pick the SIMPLEX soft-face mallet. Once you have made that choice, you will never want to go back: Never slipping off to the side, the soft-face mallet delivers solid and precise strikes, exceptional handling thanks to its ergonomically shaped handle, and savings in cost as all components are upgradable. The black high-quality insert made of composite rubber is ultra low-wear, while the white superplastic insert generates even greater impact force. While the diameters of 60 mm and 80 mm are the absolute top sellers, the diameter of 50 mm is the best choice for those who do not need quite as much power. To make it easier and faster for the user to pick up the soft-face mallet, Halder has equipped the Ø60 mm with a “stand-up”!

SIMPLEX sledge hammers are used for setting curbstones and L-stones as they allow the user to work in a standing position. They are equipped with a black high-quality rubber insert as well as with a white superplastic insert for even greater impact force. Available are three different versions: An 80 mm diameter with a total length of 800 mm, a 100 mm diameter with a total length of 1,000 mm, and a new 60 mm diameter with a total length of 780 mm, which features a rubber insert with “stand-up” that lets the hammer stand up securely and allows the user to grab it without bending over.

Black marring left behind on bright materials such as natural stone is a major nuisance. To solve this problem, Halder offers inserts with no marring: the grey TPE-mid insert boasts similar impact qualities as the black rubber insert, while the blue TPE-soft insert is substantially softer. These inserts are guaranteed to save you the hassle of unnecessary cleaning and unpleasant discussions with the customer! Popular choices are the versions with a diameter of 60 mm (total weight 1,420 g) and with a diameter of 50 mm (total weight 1,060 g).

The task of loosening concrete formwork often requires strikes that are powerful, yet gentle enough to keep the formwork from sustaining damage. This scenario calls for Halder forestry sledges as they are fitted with special nylon inserts that can do more than just preserve the formwork. Generating significantly less noise than steel hammers, these non-rebound tools also cause less strain on the user's joints. Best suited are the forestry sledges with a diameter of 100mm and a total weight of 5,000g or 6,500g.

A convenient and long-lasting helper, the mallet block made by Halder is also much studier than a simple piece of wood thanks to the fact that it is made of wear-resistant special plastic.  The mallet block can be used to create smooth transitions, compact the substrate or protect surfaces from becoming damaged.

Floor tiling calls for gentle handling of the soft-face mallet! Engineered with a diameter of 40mm and an aluminium housing, the SIMPLEX soft-face mallet allows the user to apply the delicate touch necessary for the job thanks to its low weight of 345g. The most careful application can be accomplished with the soft, blue TPE-soft insert. Those who need slightly greater impact force will opt for the grey, medium hard TPE-mid insert. Both inserts are non-marring and will not leave any undesired marks on the tiles!

Essential to the task of drywall construction is the positioning of beams, window sills and similar structures without causing damage or leaving behind any undesired rubber marks. This is where the SIMPLEX soft-face mallets with their non-marring inserts come into play: the grey TPE-mid insert boasts similar impact qualities as the black rubber insert, while the blue TPE-soft insert is substantially softer and thus ideal for work steps that require a careful touch. A popular choice is the version with a diameter of 50mm (total weight 1,060g). If the job requires powerful, yet gentle strikes, the SECURAL mallet is the best option thanks to its medium hard inserts and its weight of 1,000 g.

Put an end to aching joints and the risk of injury from metal splinters! The non-rebound SUPERCRAFT mallets make it possible to drive in metal stakes and cord irons in a safe and gentle manner. Transmitting the full impact force, the mallet reduces the number of necessary strikes to a minimum. Better yet, its robust nylon insert allows the SUPERCRAFT to generate much less noise than a stonemason’s hammer. Ideally suited are the Ø 60 mm and the Ø 70 mm versions with a weight of 1,705 g and 2,215 g, respectively.

The SIMPLEX starter kit is perfect all around: for work and after hours. A total of 4 different inserts allows you to configure your own individual SIMPLEX, while the included Push bottle opener, uniquely shaped after the SIMPLEX insert, complements the set.

This Promotional Box Dreamteam Construction comprised of two specialists, the SIMPLEX soft-face mallet and the PICARD mining sledge BlackTec® FS 328.

This SIMPLEX Plus Box Gardening / Landscaping contains the SIMPLEX soft-face mallet and a Type 80 AS STABILA spirit level, 20cm as a bonus.

This Promotional Box Dreamteam Floor Tilling comprises the two floor tiling specialists made by HALDER and PICARD.