| Grub Screws | Can be used for pressing on and clamping. Can be combined with thrust pads. |
| | EH 22540. Grub Screws with thrust point EH 22570. Grub Screws ball-headed |
| | |
| Seating Pins | To be used as seat, stop and thrust pad. |
| | EH 22680. Seating Pins, ribbed or pointed EH 22680. Seating Pins, pin-shaped EH 22690. Pins EH 22690. Seating Pins, adjustable |
| | Types with plastic contact surface. Can be used as protective supports, stops and thrust pads. This protects high-quality surfaces from damage. |
| | EH 22691. Seating Pins, with plastic contact surface |
| | |
| Retrieval Systems
| For querying the workpiece position - pneumatic or digital. The signal of the retrieval unit (EH 22810.) can be transmitted both via a hard-wired connection or via radio signal. |
| | EH 22800. Monitoring Units for Positioning Sensors, pneumatic EH 22810. Retrieval Units, with sensor |
| | |
| Ball-Ended Thrust Screws | For clamping and supporting of surfaces that are not exactly parallel. |
| | EH 22700. Ball-Ended Thrust Screws, headed, ball protected against rotating EH 22700. Ball-Ended Thrust Screws, headless, ball protected against rotating EH 22710. Ball-Ended Thrust Screws, headed, round ball EH 22710. Ball-Ended Thrust Screws, headed, flat-faced ball EH 22720. Ball-Ended Thrust Screws, headless, round ball EH 22720. Ball-Ended Thrust Screws, headless, flat-faced-ball EH 22720. Ball-Ended Thrust Screws, headless, with fine-pitch thread EH 22720. Ball-Ended Thrust Screws, headless, short EH 22720. Ball-Ended Thrust Screws, headless, round ball and hexalobular socket EH 22720. Ball-Ended Thrust Screws, headless, flat-faced ball and hexalobular socket |
| | |
| Self-Aligning Pads | As seat, thrust pad, for installation in clamping elements and for compensation of mold slopes. Adjustable. |
| | EH 22730. Self-Aligning Pads EH 22730. Self-Aligning Pads with hard metal ball, ribbed EH 22740. Self-Aligning Pads, adjustable |
| | Self-resetting design to zero position. |
| | EH 22731. Self-Aligning Pads, self-resetting EH 22731. Self-Aligning Pads with hard metall ball, ribbed and self-resetting EH 22741. Self-Aligning Pads, adjustable, with self-resetting |
| | |
| Thrust Screws | Can be used for gentle clamping / pressing of thread spindles, axes, shafts and surface treated parts. |
| | EH 22760. Thrust Screws with brass pin EH 22760. Thrust Screws with plastic pin |
| | |
| Nuts for T-slots | As connecting element in the machine table. |
| | EH 23010. Nuts for T-slots, DIN 508 EH 23010. Nuts for T-slots, DIN 508, with antislipping device EH 23020. Nuts for T-slots, extended EH 23020. Nuts for T-slots, rhombus |
| | |
| Clamping Screws | Can be used as clamping screws. Various designs and sizes. |
| | EH 23030. T-Bolts, DIN 787 EH 23040. Studs for T-Nuts, DIN 6379 EH 23040. Studs for T-Nuts, b1 long, DIN 6379 EH 23040. Studs for T-nuts, with internal hexagon, similar to DIN 6379 |
| | |
| Spherical Washers / Conical Seats | Connecting- and height adjusting elements for compensation at different angles. |
| | EH 23050. Spherical Washers / Conical Seats, DIN 6319 EH 23050. Compact Spherical Washers / Conical Seats, similar to DIN 6319 |
| | |
| Shaft / Plain Washers | Washers and precisely ground version to extend the clamping and support height. |
| | EH 23060. Shaft / Plain Washers, DIN 6340, heat-treated EH 23060. Washers, precision design EH 23061. Shaft / Plain Washers EH 1007. Shaft / Plain Washers EH 1107. Shaft / Plain Washers EH 1108. Shaft / Plain Washers EH 1617. Shaft / Plain Washers |
| | |
| Clamping Nuts | Special collar nuts, e. g. with conical seat. |
| | EH 23070. Fixture Nuts, DIN 6330 (height 1,5 d) EH 23080. Collar Nuts, DIN 6331 (height 1,5 d) EH 23080. Collar Nuts with conical seat EH 23090. Extension Nuts (height 3 d) |
| | |
| Clamps | Various designs and sizes for clamping workpieces. |
| | EH 23140. Clamps, DIN 6314, flat EH 23150. Clamps, DIN 6315 B, forked EH 23160. Clamps, DIN 6316, with goose-neck EH 23160. Clamps, stepped EH 23170. Clamp with nose, closed EH 23180. Clamps with flat-faced ball, similar to DIN 6314 EH 23180. Clamps with nose EH 23190. Clamps with soft face, similar to DIN 6314 EH 23190. Clamps with exchangeable soft jaw EH 23200. Supporting Elements for clamps |
| | |
| Straight Clamps, slotted | Clamps with two different flat noses as well as stepless adjustment of the clamping height as well. |
| | EH 23185. Clamps, slotted with adjustable counter piece EH 23185. Clamps, slotted with adjustable counter piece with T-Bolt EH 23185. Clamps, slotted with adjustable counter piece with stud EH 23185. Clamps, slotted with adjustable counter piece with stud with internal hexagon EH 23185. Support Extension for straight clamps, slotted with adjustable counter piece |
| | |
| Clamping Element Systems | Clamps with integrated support and threaded spindle as well as various adapters. |
| | EH 23700. Clamping Element System EH 23700. Straight Clamps, short EH 23700. Straight Clamps, long EH 23700. Intermediate Elements EH 23700. Intermediate Elements with support EH 23700. Base Elements EH 23700. Base Elements, swivelling EH 23700. Base Elements, low EH 23700. Base Elements for location hole |
| | |
| Down-Hold Clamps | Horizontal clamping elements with pull-down effect. |
| | EH 23210. Down-Hold Clamps with cranked clamping lever EH 23210. Down-Hold Clamps without clamping lever EH 23210. Down-Hold Clamps without clamping lever, with support EH 23210. Holding Plates for down-hold clamps EH 23211. Sub-Part Clamps |
| | |
| Push Plungers | Elements for easy and safe positioning of workpieces at stop and support points prior to clamping. |
| | EH 23230. Push Plungers with pin, protected against rotating EH 23230. Locating Clamps |
| | |
| Clamping Vices | Solid compact clamping module with a horizontally acting clamping force and a robust mechanical spindle. |
| | EH 23231. Clamping Vices EH 23231. Standard Jaws for vices EH 23231. Interchangeable Jaws for vices, with pull-down effect EH 1137. Clamping Vices moveable jaw EH 1137. Clamping Vices fixed jaw EH 1138. Clamping Vices, replacement jaw, soft EH 1138. Clamping Vices, replacement jaw, ribbed/flat |
| | |
| Taper Clamping Units | Double-sided clamping element with small installation space and high clamping force. |
| | EH 23250. Taper Clamping Units EH 23251. Double Edge Clamps EH 23251. Double Edge Clamps, machinable chucks |
| | |
| Clamps / Clamping Claws | Clamping devices for low mounting height with a high clamping force. |
| | EH 23290. Pitbull® Clamps EH 23290. Clamping Claws |
| | |
| Bedding Supports | For clamping and supporting additional clamping points. |
| | EH 23220. Bedding Supports |
| | |
| Support Elements | For clamping and supporting additional clamping points. |
| | EH 23220. Supporting Elements |
| | |
| Floating Clamps | For clamping and supporting additional clamping points. Different versions with separate or combined clamping and locking. |
| | EH 23320. Floating Clamps, compact construction, with combinded clamping and locking, M12 EH 23320. Floating Clamps, compact construction, with separate clamping and locking, M12 EH 23320. Floating Clamps, with combinded clamping and locking, M12 EH 23320. Floating Clamps, with separate clamping and locking, M12 EH 23320. Standard Clamping Jaws for floating clamp M12 EH 23320. Clamping Jaws for floating clamp M12 EH 23320. Floating Clamps, with combined clamping and locking, M16 EH 23320. Clamping Jaws for floating clamp M16 |
| | |
| Eccentric Clamps | Clamping device for fast clamping of workpieces by means of eccentrics . |
| | EH 23260. Clamping Devices "actima" EH 23270. Eccentric Clamping Clamps EH 23270. Eccentric Clamping Washers EH 23271. Eccentric Clamps EH 23380. Double Eccentric Levers EH 23390. Eccentric Levers with fulcrum pin EH 23390. Eccentric Quick Clamps with female thread EH 23390. Eccentric Quick Clamps with screw EH 23400. Fulcrum Pins EH 23410. Eccentric Clamps EH 23410. Eccentric Clamping Modules with shaft location |
| | |
| Down-Thrust Clamps | Universal mechanical clamping element for fast and comfortable changing and clamping of workpieces by means of manually swivelling clamping claw. |
| | EH 23310. Down-Thrust Clamps, swivelling, size 25 EH 23310. Down-Thrust Clamps, swivelling, low construction, size 44 EH 23310.Down-Thrust Clamps, swivelling, size 40 EH 23310. Down-Thrust Clamps, swivelling, size 60 EH 23310. Down-Thrust Clamps, swivelling, size 82,5 EH 23310. Down-Thrust Clamps, moveable, size 40 EH 23310. Positioning Rings EH 23370. Clamping Elements |
| | |
| Height Adjusting Cylinders | Universal adapter for increasing the clamping / support height (height grinded) - also suitable for down-thrust clamps. |
| | EH 23310. Height Adjusting Cylinders |
| | |
| Toggle Clamps | Quick Action Toggle Clamp for holding and clamping workpieces. |
| | EH 23330. Vertical Toggle Clamps with horizontal base EH 23330. Horizontal Toggle Clamps with horizontal base EH 23330. Toggle Clamps Push-Pull Type with angle base EH 23330. Toggle Clamps Push-Pull Type with fastening thread EH 23330. Toggle Clamps Hook Type with horizontal base |
| | |
| Compact Clamps | Universally applicable clamping unit. Extension of the clamping height possible via adapter. |
| | EH 23690. Compact Clamps EH 23690. Height Adaptors for compact clamp |
| | |
| Centering Clamping Elements | Diverse clamping devices for clamping and centering of workpieces with internal bore. |
| | EH 23340. Centering Clamping Elements with clamping segments EH 23340. Centering Clamping Elements with clamping balls EH 23340. Centering Clamping Element with clamping segments, operating from the bottom EH 23340. Centering Clamping Elements with clamping balls, operating from the bottom EH 23340. Centering Clamping Mandrels EH 23340. Centering Clamping Mandrels with lateral handling |
| | |
| Clamping Bars | Bars for mounting support points, clamping elements or similar parts. |
| | EH 1013. Clamping Bars EH 1113. Clamping Bars EH 1513. Clamping Bars EH 1613. Clamping Bars |
| | |
| Support Clamping Bars | Bars for mounting support points, clamping elements or similar parts. |
| | EH 1114. Support Clamping Bars EH 1047. Support Clamping Bars EH 1147. Support Clamping Bars EH 1550. Supporting Bars EH 1650. Supporting Bars |
| |
| Supporting Plates | Plates for mounting support points, clamping elements or similar parts. |
| | EH 23210. Supporting Plates EH 1047. Supporting Plates EH 1147. Supporting Plates EH 1547. Supporting Plates EH 1647. Supporting Plates |
| | |
| Stops | Use as a stop in combination with a grub screw or seating pins. |
| | EH 23281. Stops EH 1014. Stops EH 1114. Stops EH 1614. Stops |
| | |
| Positioning-Clamping Pins | Quick-change system for quick fastening/positioning and changing of plates/fixture systems. |
| | EH 23111. Positioning Clamping Pins EH 23111. Manual Handles for positioning clamping pins EH 23111. Bushings for positioning clamping pins EH 23111. Locating Bushings for positioning clamping pins, for press fit EH 23111. Locating Bushings for positioning clamping pins, for screw fit |