23271.0005 - Eccentric Clamps
The eccentric clamp allows clamping with pull-down effect on different workpiece forms at low height.
This article 23271.0005 - Eccentric Clamps / (d1: M5) is one variant of the article group Eccentric Clamps (EH 23271.)
d1 [mm]
d2 [mm]
l2 [mm]
Clamping force - max. [kN]
More details
Article-No.
Documents
Price
[€]
Available
Material
- Case-hardened steel, case-hardened and blue zinc-plated
Assembly
- Manufacture a thread with the corresponding distance L2 / L3 to the workpiece.
- Screw in the eccentric clamp at the necessary height and set it relative to the workpiece with its flat side.
- Insert the workpiece and tighten the clamping pin using the internal hexagon. The proper tension is achieved after approx. 1/3 turn.
The threaded hole must be lubricated on a regular basis.
The rotational movement during tightening must always be completed towards the stops in order to prevent the workpiece from turning away from the stops.
Direct download
More file formats
Contains lead - compliant according to exceptions 6a / 6b / 6c.
Contains SVHC substances >0,1% w/w
Contains lead - SVHC list [REACH] as of 27.06.2024.
Contains Proposition 65 substances
Lead can cause cancer and reproductive harm from exposure
https://www.P65Warnings.ca.gov/