23250.0048 - Taper Clamping Units
Taper clamping units are particularly suitable for horizontal and vertical multiple clampings. The taper clamps are compact in build and therefore enable clamping without geometric interference.
This article 23250.0048 - Taper Clamping Units / single taper, flat clamping jaw, two-sided (d1: M8) is one variant of the article group Taper Clamping Units (EH 23250.)
- single taper, flat clamping jaw, two-sided – picture 1
- d1: M8
- l: 27 mm – 31 mm
- b1: 29 mm
- b2: 21 mm
- h1: 15 mm
- h2: 2.5 mm
- Clamping force max.: 20 kN
- Tightening torque max.: 43 Nm
- Weight: 73 g
Material
Body
- Tool steel, hardened, bright
Screw
- Heat-treated steel, tempered, quality 12.9
Spring
- Spring steel wire
Clamping jaws
- Tool steel, hardened, blackened and ground
References
For further taper clamping units, refer to section "Multiple Clamping Systems"
Assembly
Can be mounted in a threaded hole or with T-nuts for horizontal or vertical multiple clamping.
Operation
Inserting the socket head screw moves the two clamping chucks outwards and presses the workpieces against a stop. Using the double taper, an additional vertical clamping force will be achieved. Stroke of taper clamping units with M 5 = ±0,5, M 8 = ±0,5, M 12 = ±1 and M 16 = ±1,5. Can be mounted in a threaded hole or with T-nuts for horizontal or vertical multiple clamping.
Additional variants of this article
Accessories
Nuts for T-Slots (EH 23010.) have to be purchased separately.
Further products
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863.
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 27.06.2024.
Does not contain Proposition 65 substances
No Proposition 65 substances included.
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.