23111.0766 - Locating Bushings
for positioning clamping pins, for press fit
These locating bushes for positioning clamping pins are mounted in the counterpart.
This article 23111.0766 - Locating Bushings for positioning clamping pins, for press fit / (d1 F6: 25 mm) is one variant of the article group Locating Bushings for positioning clamping pins, for press fit (EH 23111.)
- Case-hardened steel
- d1 F6: 25 mm
- d2 +0.01: 35.03 mm
- d3: 31 mm
- d4: 40.2 mm
- l1: 5.25 mm
- l2: 10.22 mm
- l3: 21 mm
- Location hole D2 H7: 35 mm
- Location hole D5 +1: 42 mm
- Location hole T1 ±0.02: 10.55 mm
- Location hole T2 min.: 28 mm
- Weight: 79 g
Material
- Case-hardened steel, case-hardened, blackened
Assembly
The press fit locating bushing for positioning clamping pins are inserted in the machine table or the base plate with light pressure.
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863.
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 27.06.2024.
Does not contain Proposition 65 substances
No Proposition 65 substances included.
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.