23341.0016 - Shaft Clamps
Shaft clamps are used to clamp round workpieces, e.g. shafts, axels, tubes or rods voth axially and radially.
This article 23341.0016 - Shaft Clamps / (d1 h11: 16 mm) is one variant of the article group Shaft Clamps (EH 23341.)
- Steel
- d1 h11: 16 mm
- d2: M8
- d3: M5
- l1 max.: 46 mm
- l2: 16 mm
- l3: 8 mm
- WS: 6 mm
- Tightening torque max.: 25 Nm
- Location hole Hub bore D1 H7: 16 mm
- Location hole Shaft diameter D2: 20 mm – 30 mm
- Location hole L1 +0.2: 4 mm
- Weight: 52 g
WS: 6 mm
d: M5 mm
- special hexagon key
- WS: 6 mm
- d: M5
- Weight: 28 g
Material
Body
- Steel, blackened
Spring
- Stainless steel
Clamping screw
- Steel, zinc-plated
Notes
The thread d3 serves to hold the assembly tool (optional).
Assembly
- Expand the clamping jaws to the diameter of the shaft to be clamped.
- Insert shaft clamp into hole using the assembly tool.
- Insert and position the shaft.
- Clamp using cylinder screw WS (observe tightening torque).
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863.
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 27.06.2024.
Does not contain Proposition 65 substances
No Proposition 65 substances included.
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.