25162.0065 - Hinges
stainless steel, elongated on both sides
These hinges from stainless steel are characterised by the compact design.
The hinge pins are form-fit pressed and are therefore suitable for use in case of strong vibrations and shocks.
Appropriate friction pairings of the hinge components and the lubrication reduce abrasion to a minimum.
The version with centering steps avoids lateral slipping under high loads and thus protects the fixing screws from unacceptable lateral forces.
This article 25162.0065 - Hinges stainless steel, elongated on both sides / with additional mounting hole on both sides (b1: 76 mm, l1: 50 mm) is one variant of the article group Hinges stainless steel, elongated on both sides (EH 25162.)
- with additional mounting hole on both sides – picture 1, dull blasted
- b1: 76 mm
- l1: 50 mm
- b2: 56 mm
- b3: 30 mm
- b4: 34 mm
- d1: 6.3 mm
- d2: 6 mm
- d3: 9.5 mm
- h1: 12.5 mm
- h2: 6 mm
- h3: 6.5 mm
- h4: 2 mm
- h5: 13 mm
- l2: 30 mm
- Weight: 160 g
Material
Body
- Stainless steel 1.4405, dull blasted
Axis
- Stainless steel
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863.
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 27.06.2024.
Does not contain Proposition 65 substances
No Proposition 65 substances included.
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.