25030.0021 - Clamping Nuts
self-locking
Clamping nuts are used for rotating parts, especially for reversible shafts, for example for fixing the grinding wheel. The compact construction ensures a safe function and allows quick installation using a face wrench.
Compared with other backup methods, the clamping nut has the following advantages:
- Self-locking (even with changing direction of rotation of the shaft)
- Easy installation / dismantling
- Also for repetitive clamping operations
This article 25030.0021 - Clamping Nuts self-locking / (d1: M20 x 1,5 mm, d2: 50 mm) is one variant of the article group Clamping Nuts self-locking (EH 25030.)
for clamping nuts
adjustable face wrench, offset
: adjustable face wrench, offset
- adjustable face wrench, offset
- Weight: 112 g
Material
- Heat-treated steel, blackened
Notes
Further dimensions on request.
Assembly
The clamping nut consists of an outer and inner ring, which form a unit.
The outer ring has a conical bore, the slotted inner ring has a conical outer surface and a female thread.
When tightening the clamping nut using a face pin wrench, the two conical surfaces move against each other. As a result, the slotted inner ring narrows like a collet. The nut clamps itself on the flanks of the thread so much, that they do not detach even with opposite axis rotation.
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863.
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 27.06.2024.
Does not contain Proposition 65 substances
No Proposition 65 substances included.
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.