22420.0062 - Clamp Lock Pins
with button handle
For rapid fastening, locking, adjusting, replacing, and securing in blind holes (H11) without additional locating bushings.
Quick and easy to release for connections which are made repeatedly. Flexible use because the balls are clamped between bolt and hole.
All versions are corrosion resistant. When using stainless steel 1.4542: high-strength, hardened, abrasion resistant pin with high load capacity.
This article 22420.0062 - Clamp Lock Pins with button handle / (d1 -0.04 -0.08: 10 mm, l1 +2 -1: 20 mm) is one variant of the article group Clamp Lock Pins with button handle (EH 22410. /EH 22420.)
- Stainless steel
- d1 -0.04 -0.08: 10 mm
- l1 +2 -1: 20 mm
- d2 +0.1 -0.05: 10.3 mm
- d3: 14.1 mm
- d4: 25 mm
- l2: 30 mm
- l3: 27.3 mm
- l4: 22.6 mm
- l5: 18.6 mm
- Holding force1) min. Steel, soft: 120 N
- Location hole H11: 10 mm
- Operating temperature range min.: -30 °C
- Operating temperature range max.: 150 °C
- Weight: 35 g
- Shearing resistance, two-shear2) min.: 100 kN
Material
Pin part
- Stainless steel 1.4542, precipitation-hardened
Handle
- Aluminium, black similar to RAL 9005
Press button
- Case-hardened steel, nitrided, yellow similar to RAL 1016
Spring
- Stainless steel
Notes
Special types on request.
The clamp lock pin must not be used for lifting loads.
Assembly
Simple H11 boreholes are sufficient.
Mounting:
- Press in the button and hold it down
- Insert the lifting pin
- Release the button (The button must be back in its original position)
Dismantling:
- Press in the button and hold it down.
- Remove the lifting pin.
- Release the button.
Operation
Clamp lock pins can be used in blind holes. The holding forces achieved in an H11 borehole depends on the material of the counterpart:
- Steel, hardened - min. 30 N
- Steel, soft - min. 120 N
- Stainless steel, soft - min. 120 N
- Al, aluminum alloy - min. 250 N
Additional variants of this article
Accessories
Can easily be fitted with retaining cable EH 22400.
Further products
Non-RoHS compliant
Not compliant according to Directive 2011/65/EU and Directive 2015/863.
Contains SVHC substances >0,1% w/w
Contains lead - SVHC list [REACH] as of 27.06.2024.
Contains Proposition 65 substances
Lead can cause cancer and reproductive harm from exposure
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.