22123.0116 - Index Plungers
with sensor
Index plungers are used for indexing bores.
The index plunger with sensor makes it possible to monitor the indexing position of the indexing plunger. When it engages, the sensor already switches after 2/3 of the indexing distance l2. In addition to the electronic signal, the switching status is indicated directly on the sensor via an LED.
This article 22123.0116 - Index Plungers with sensor / with knob and locking (d1 -0.02 -0.05: 16 mm, d2: M24 x 2 mm, l2 min.: 20 mm) is one variant of the article group Index Plungers with sensor (EH 22123.)
- with knob and locking – picture 2
- d1 -0.02 -0.05: 16 mm
- d2: M24 x 2 mm
- l2 min.: 20 mm
- d3: 33 mm
- l1: 85 mm
- l3: 38 mm
- l4: 18.5 mm
- WS: 27 mm
- Spring load1) F1: 13 N
- Spring load1) F2: 54 N
- Operating temperature range min.: -25 °C
- Operating temperature range max.: 75 °C
- Weight: 313 g
Material
Body
- Stainless steel 1.4305
Locking pin
- Stainless steel 1.4305, nickel-plated
Knob
- Thermoplastic PA 6, black, dull
Cable
- Thermoplastic PUR, black
Magnet
- Permanent magnet
Sensor
- Thermoplastic PA 6, black, dull
Lock nut
- Stainless steel A2 (ISO 8675)
Notes
Knob not removable.
Assembly
The enclosed separate sensor and sensor clip can be mounted with the enclosed Allen key. The derivation direction of the sensor cable can be determined individually.
- Push the sensor into the side of the sensor clip.
- Tighten the internal hexagon screw of the sensor with light hand force (max. 0.1 Nm).
- Clip the sensor clip into the annular groove of the index plunger in any position.
- By turning the sensor clip, the sensor cable's derivation direction can be adjusted.
Note:
To avoid interferences, no magnetic fields should act on the index plunger.
Operation
When using locking index plungers, the knob is pulled-out, turned 90° and secured by a notched catch (when locking pin should not overhang).
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863.
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 27.06.2024.
Does not contain Proposition 65 substances
No Proposition 65 substances included.
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals