2B150.0040 - Lateral Plunger
smooth, without seal - INCH
To be used for positioning and applying pressure, e.g. during painting and sandblasting.
This article 2B150.0040 - Lateral Plunger smooth, without seal - INCH / Light spring load (d1: 5/8 in, d2: 0.393 in, Spring load F max.1: ~ 22.5 lb) is one variant of the article group Lateral Plungers smooth, without seal - INCH (EH 2B150.)
- Pin: Steel/Light spring load
- d1: 5/8 in
- d2: 0.393 in
- Spring load F max.1): ~ 22.5 lb
- l1 -0.08: 0.669 in
- l2: 0.657 in
- Stroke s: 0.063 in
- Location hole D H8: 5/8 in
- x2): 0.126 in
- Operating temperature range max.: 482 °F
- Weight: 0.527 oz
for lateral plungers, smooth
d1: 16 mm
- assembly tool
- d1: 16 mm
- Weight: 105 g
Material
Body
- Aluminium AI
Spring
- Stainless steel
Pin
- Steel, case-hardened, zinc-plated by galvanization
Characteristic
Version light spring load = spring from stainless steel
Assembly
Installation by pressing in.
Formula for calculating the center distance for the mounting hole:
l0 = z/2 + w + x,
l0 = center distance,
y = workpiece height,
w = workpiece length,
x = coordinate dimension,
s = stroke,
z = stop diameter
Calculation dimension x:
y greater than or equal to l2 - d2/2,
then x = d2/2 - s
(value x for this case see table)
or
y smaller than l2 - d2/2,
then x = d2/2 - s - [(l2 - d2/2 - y) * 0,123]
RoHS compliant
Contains lead - compliant according to exceptions 6a / 6b / 6c.
Contains SVHC substances >0,1% w/w
Contains lead - SVHC list [REACH] as of 27.06.2024.
Contains Proposition 65 substances
Lead can cause cancer and reproductive harm from exposure
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.