Locating Pins DIN 6321
EH 22630.
Cylindric locating pins (DIN 6321, form B) for locating workpieces in toleranced holes and also to be used as stops and feet.
Flattened locating pin (DIN 6321, form C) used to overcome differences in tolerances, between holes or to position an element in one direction only.
The bearing surface of the seating pin has no centre (picture 1). A centre is permitted for the seating pins (picture 2 and 3) according to DIN 6321.
Your selection resulted in 28 hits
More details
- locating pin, flattened, DIN 6321, form C – picture 2
- d1 g6: 20 mm
- l1: 15 mm
- b: 5 mm
- d2 n6: 12 mm
- l2: 18 mm
- l4: 9 mm
- Location hole D1 H7: 12 mm
- Weight: 39 g
- locating pin, flattened, DIN 6321, form C – picture 2
- d1 g6: 20 mm
- l1: 25 mm
- b: 5 mm
- d2 n6: 12 mm
- l2: 18 mm
- l4: 9 mm
- Location hole D1 H7: 12 mm
- Weight: 55 g
- locating pin, flattened, DIN 6321, form C – picture 2
- d1 g6: 25 mm
- l1: 15 mm
- b: 5 mm
- d2 n6: 12 mm
- l2: 18 mm
- l4: 9 mm
- Location hole D1 H7: 12 mm
- Weight: 49 g
- locating pin, flattened, DIN 6321, form C – picture 2
- d1 g6: 25 mm
- l1: 25 mm
- b: 5 mm
- d2 n6: 12 mm
- l2: 18 mm
- l4: 9 mm
- Location hole D1 H7: 12 mm
- Weight: 72 g
Material
- Tool steel, hardened, ground
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863.
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 27.06.2024.
Does not contain Proposition 65 substances
No Proposition 65 substances included.
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.