22590.0895 - Mounting Pads
with fastening holes
Mounting pads can be used as foot or thrust pad. Not parallel bearing surfaces up to 15° degrees can be compensated.
Including two fastening holes in pad.
This article 22590.0895 - Mounting Pads with fastening holes / pad and ball element with bolt from stainless steel (d1: M24, l1: 100 mm) is one variant of the article group Mounting Pads with fastening holes (EH 22590.)
- pad and ball element with bolt from stainless steel – picture 2
- d1: M24
- d2 -0.5: 100 mm
- l1: 100 mm
- d3: 11 mm
- l3: 78 mm
- h1: ~ 45 mm
- l2: 91 mm
- h2: 20.5 mm
- WS: 36 mm
- Load capacity for static load max.: 52 kN
- Weight: 1906 g
Material
Ball element with bolt
- Stainless steel 1.4305
Lock nut
- Stainless Steel A2, ISO 4032
Pad
- Stainless steel 1.4305
Notes
For the versions d1 = M10 and M12 the lock nut conforms to DIN 934.
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863.
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 27.06.2024.
Does not contain Proposition 65 substances
No Proposition 65 substances included.
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.