22731.0452 - Self-Aligning Pads
self-resetting
Self-aligning pads are used as stop, support and thrust pad and are suitable for installation in clamping elements.
By resetting to the parallel position the contact point of the self-aligning pad provides a defined initial position, thus preventing the pad clamping in an oblique position when inserting the workpiece.
This article 22731.0452 - Self-Aligning Pads self-resetting / for locating hole, flat-faced ball, bearing surface plain (d1 n6: 12 mm, d2: M3) is one variant of the article group Self-Aligning Pads self-resetting (EH 22731.)
- for locating hole, flat-faced ball, bearing surface plain – picture 3, Stainless steel
- d1 n6: 12 mm
- d2: M3
- d3: 7.2 mm
- l1: 17 mm
- l3 max.: 3.2 mm
- Ball diameter: 10 mm
- Location hole Ø H7: 12 mm
- Location hole Depth min.: 12 mm
- Load capacity for static load1) max.: 10 kN
- Tightening torque max.: 1.3 Nm
- Weight: 13 g
Material
Spring element
- Thermoplastic PUR
Ball
- Stainless steel 1.3541, nickel-plated
Body
- Stainless steel 1.4057, heat-treated
Notes
Ball protected against rotating.
Loading capacity valid for steel and stainless steel designs.
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863.
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 27.06.2024.
Does not contain Proposition 65 substances
No Proposition 65 substances included.
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.