22080.0003 - Spring Plunger
smooth, with collar and ball
Spring plungers can be used for locating or for applying pressure, as a detent or for ejection.
This article 22080.0003 - Spring Plunger smooth, with collar and ball / body and ball from stainless steel, standard spring load (d1 +0.1: 3 mm) is one variant of the article group Spring Plungers smooth, with collar and ball (EH 22080.)
- body and ball from stainless steel, standard spring load – picture 1
- d1 +0.1: 3 mm
- d2: 2.38 mm
- d3: 3.5 mm
- l1: 4 mm
- l2: ~ 0.6 mm
- Stroke s: 0.7 mm
- Spring load1) F1: ~ 1.8 N
- Spring load1) F2: ~ 3.5 N
- Operating temperature range max.: 250 °C
- Location hole H7: 3 mm
- Weight: 0.1 g
Material
Body
- Stainless steel 1.4303
Ball
- Stainless steel, hardened
Spring
- Stainless steel
Notes
Special types on request.
Spring plungers are specially tested for spring range and forces.
References
Calculation of indexing resistance, please refer to appendix - Technical Data -
Version with higher spring forces see "EH 22080. Spring Plungers, smooth, long, with collar and ball".
Characteristic
Standard spring load: no marking
Assembly
A tolerance of H7 is recommended for the locating hole of d1.
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863.
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 27.06.2024.
Does not contain Proposition 65 substances
No Proposition 65 substances included.
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.