Self-Aligning Pads
EH 22730.
Self-aligning pads are used as stop, support and thrust pad and are suitable for installation in clamping elements.
Your selection resulted in 6 hits
Version
picture
Material
d1 [mm]
d2 [mm]
Load capacity for static load max. [kN]
More details
Article-No.
CAD / Documents
Price
[€]
Available
Version:
with male thread, flat-faced ball, bearing surface plain
picture:
1
Material:
Heat-treated steel, tempered, phosphated
d1 [mm]:
13 mm
d2 [mm]:
M8
Load capacity for static load max. [kN]:
10 kN
Article-No.:
22730.0013
- with male thread, flat-faced ball, bearing surface plain – picture 1, Heat-treated steel
- System: V40
- d1: 13 mm
- d2: M8
- d3: 7.2 mm
- l1: 13 mm
- l2 -0.5: 8 mm
- Ball diameter: 10 mm
- WS: 11 mm
- Load capacity for static load max.: 10 kN
- Tightening torque max.: 25 Nm
- Weight: 13 g
Version:
with male thread, flat-faced ball, bearing surface plain
picture:
1
Material:
Heat-treated steel, tempered, phosphated
d1 [mm]:
20 mm
d2 [mm]:
M12
Load capacity for static load max. [kN]:
25 kN
Article-No.:
22730.0020
- with male thread, flat-faced ball, bearing surface plain – picture 1, Heat-treated steel
- System: V70/L12
- d1: 20 mm
- d2: M12
- d3: 10.5 mm
- l1: 18 mm
- l2 -0.5: 12 mm
- Ball diameter: 16 mm
- WS: 17 mm
- Load capacity for static load max.: 25 kN
- Tightening torque max.: 82 Nm
- Weight: 43 g
Version:
with male thread, flat-faced ball, bearing surface plain
picture:
1
Material:
Heat-treated steel, tempered, phosphated
d1 [mm]:
30 mm
d2 [mm]:
M16
Load capacity for static load max. [kN]:
90 kN
Article-No.:
22730.0030
- with male thread, flat-faced ball, bearing surface plain – picture 1, Heat-treated steel
- System: V70/L16
- d1: 30 mm
- d2: M16
- d3: 20 mm
- l1: 27 mm
- l2 -0.5: 16 mm
- Ball diameter: 25 mm
- WS: 27 mm
- Load capacity for static load max.: 90 kN
- Tightening torque max.: 206 Nm
- Weight: 151 g
Version:
with male thread, flat-faced ball, bearing surface ribbed
picture:
2
Material:
Heat-treated steel, tempered, phosphated
d1 [mm]:
13 mm
d2 [mm]:
M8
Load capacity for static load max. [kN]:
10 kN
Article-No.:
22730.0313
- with male thread, flat-faced ball, bearing surface ribbed – picture 2, Heat-treated steel
- System: V40
- d1: 13 mm
- d2: M8
- d3: 7.2 mm
- l1: 13 mm
- l2 -0.5: 8 mm
- Ball diameter: 10 mm
- WS: 11 mm
- Load capacity for static load max.: 10 kN
- Tightening torque max.: 25 Nm
- Weight: 13 g
Version:
with male thread, flat-faced ball, bearing surface ribbed
picture:
2
Material:
Heat-treated steel, tempered, phosphated
d1 [mm]:
20 mm
d2 [mm]:
M12
Load capacity for static load max. [kN]:
25 kN
Article-No.:
22730.0320
- with male thread, flat-faced ball, bearing surface ribbed – picture 2, Heat-treated steel
- System: V70/L12
- d1: 20 mm
- d2: M12
- d3: 10.5 mm
- l1: 18 mm
- l2 -0.5: 12 mm
- Ball diameter: 16 mm
- WS: 17 mm
- Load capacity for static load max.: 25 kN
- Tightening torque max.: 82 Nm
- Weight: 43 g
Version:
with male thread, flat-faced ball, bearing surface ribbed
picture:
2
Material:
Heat-treated steel, tempered, phosphated
d1 [mm]:
30 mm
d2 [mm]:
M16
Load capacity for static load max. [kN]:
90 kN
Article-No.:
22730.0330
- with male thread, flat-faced ball, bearing surface ribbed – picture 2, Heat-treated steel
- System: V70/L16
- d1: 30 mm
- d2: M16
- d3: 20 mm
- l1: 27 mm
- l2 -0.5: 16 mm
- Ball diameter: 25 mm
- WS: 27 mm
- Load capacity for static load max.: 90 kN
- Tightening torque max.: 206 Nm
- Weight: 149 g
Material
Ball
- Ball-bearing steel, hardened, bright
Body
- Heat-treated steel, tempered, phosphated
Notes
Ball protected against rotating.
Loading capacity valid for steel and stainless steel designs.
Further products
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863.
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 27.06.2024.
Does not contain Proposition 65 substances
No Proposition 65 substances included.
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.