Locating Bushings for ball lock pins and socket pins
EH 22400.
This design with holes on the front face (picture 2) is suitable for applications which require installation flush to the surface.
Locating bushings are used for quick and safe locating of ball lock pins EH 22340., EH 22350., EH 22370. and EH 22380. and socket pins EH 22400.
Optimised centering due to precise collar (e.g. quick mounting of plates and components).
All versions are corrosion and abrasion resistant.
Your selection resulted in 11 hits
More details
- with internal hexagon – picture 1
- d1 H11: 5 mm
- d2: M12
- d3 h9: 18 mm
- d4: 6 mm
- l1: 19 mm
- l2: 15 mm
- l3: 9 mm
- l4: 13 mm
- l5: 5.1 mm
- l6: 9 mm
- WS: 5 mm
- Weight: 15 g
- with internal hexagon – picture 1
- d1 H11: 6 mm
- d2: M12
- d3 h9: 18 mm
- d4: 7.5 mm
- l1: 19 mm
- l2: 15 mm
- l3: 9.4 mm
- l4: 13 mm
- l5: 5.6 mm
- l6: 8.8 mm
- WS: 6 mm
- Weight: 19 g
- with internal hexagon – picture 1
- d1 H11: 8 mm
- d2: M16
- d3 h9: 22 mm
- d4: 10 mm
- l1: 25 mm
- l2: 20 mm
- l3: 12 mm
- l4: 17 mm
- l5: 7.3 mm
- l6: 11.7 mm
- WS: 8 mm
- Weight: 29 g
- with internal hexagon – picture 1
- d1 H11: 10 mm
- d2: M24
- d3 h9: 30 mm
- d4: 12.5 mm
- l1: 29 mm
- l2: 24 mm
- l3: 13.5 mm
- l4: 19.5 mm
- l5: 8.9 mm
- l6: 14.1 mm
- WS: 10 mm
- Weight: 76 g
- with internal hexagon – picture 1
- d1 H11: 12 mm
- d2: M24
- d3 h9: 30 mm
- d4: 15 mm
- l1: 29 mm
- l2: 24 mm
- l3: 14 mm
- l4: 20 mm
- l5: 9.6 mm
- l6: 14.4 mm
- WS: 12 mm
- Weight: 66 g
- plain, with face hole – picture 2
- d1 H11: 16 mm
- d2: M30
- d3 h9: 39 mm
- d4: 19.5 mm
- d5 +0.1: 5.1 mm
- l1: 39 mm
- l2: 33 mm
- l3: 15.5 mm
- l4: 23.5 mm
- l5: 10.4 mm
- l6: 16.6 mm
- l7: 30 mm
- Weight: 248 g
- plain, with face hole – picture 2
- d1 H11: 20 mm
- d2: M36
- d3 h9: 43 mm
- d4: 25.5 mm
- d5 +0.1: 5.1 mm
- l1: 49 mm
- l2: 42 mm
- l3: 17.5 mm
- l4: 31.5 mm
- l5: 11.9 mm
- l6: 23.1 mm
- l7: 30 mm
- Weight: 364 g
- plain, with face hole – picture 2
- d1 H11: 25 mm
- d2: M42
- d3 h9: 50 mm
- d4: 32 mm
- d5 +0.1: 5.1 mm
- l1: 65 mm
- l2: 57 mm
- l3: 26.5 mm
- l4: 38.5 mm
- l5: 13.3 mm
- l6: 21.8 mm
- l7: 36 mm
- Weight: 350 g
- with outer hexagon – picture 3
- d1 H11: 16 mm
- d2: M30
- d3 h9: 36 mm
- d4: 19.5 mm
- l1: 39 mm
- l2: 29 mm
- l3: 15.5 mm
- l4: 23.5 mm
- l5: 6.1 mm
- l6: 12.8 mm
- WS: 24 mm
- Weight: 124 g
- with outer hexagon – picture 3
- d1 H11: 20 mm
- d2: M36
- d3 h9: 45 mm
- d4: 25.5 mm
- l1: 49 mm
- l2: 38 mm
- l3: 17.5 mm
- l4: 31.5 mm
- l5: 7.7 mm
- l6: 19.3 mm
- WS: 30 mm
- Weight: 208 g
- with outer hexagon – picture 3
- d1 H11: 25 mm
- d2: M42
- d3 h9: 50 mm
- d4: 32 mm
- l1: 65 mm
- l2: 50 mm
- l3: 26.5 mm
- l4: 38.5 mm
- l5: 13.3 mm
- l6: 21.8 mm
- WS: 36 mm
- Weight: 350 g
Material
- Stainless steel 1.4305
adjustable face wrench, offset
: adjustable face wrench, offset
Suitable for size d1: 10 mm/12 mm/16 mm/20 mm/25 mm
- adjustable face wrench, offset
- Suitable for size d1: 10 mm/12 mm/16 mm/20 mm/25 mm
- Pin diameter -0.1: 5 mm
- Weight: 309 g
face wrench (socket wrench insert)
: face wrench (socket wrench insert)
Suitable for size d1: 16 mm/20 mm
- face wrench (socket wrench insert)
- Suitable for size d1: 16 mm/20 mm
- Pin spacing ±0.1: 30 mm
- Pin diameter -0.1: 5 mm
- Weight: 243 g
- Square drive: 1/2 in
Suitable for size d1: 25 mm
- face wrench (socket wrench insert)
- For finish picture: 2
Assembly
This design with holes on the front face (picture 2) can be installed via a cranked pin face wrench or alternatively via a pin faced socket wrench.
Ensure safe tolerances and consistent function. Easily incorporable into different materials. Can be used in thin-walled pieces. Application from both sides.
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863.
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 27.06.2024.
Does not contain Proposition 65 substances
No Proposition 65 substances included.
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.