22150.0227 - Lateral Plunger
with plastic spring and pin
To be used for positioning and applying pressure, e.g. during painting and sandblasting.
This article 22150.0227 - Lateral Plunger with plastic spring and pin / pin from stainless steel, heavy spring load (d1: 12 mm, d2: 8 mm, Spring load F max.1: ~ 100 N) is one variant of the article group Lateral Plungers with plastic spring and pin (EH 22150.)
More details
- Pin: Stainless steel/pin from stainless steel, heavy spring load
- d1: 12 mm
- d2: 8 mm
- Spring load F max.1): ~ 100 N
- l1 -1: 13 mm
- l2 ±0.5: 13.2 mm
- Stroke s: 0.6 mm
- Location hole D H8: 11.9 mm
- x2): 2.7 mm
- Operating temperature range max.: 100 °C
- Weight: 6.8 g
d1: 12 mm
- assembly tool
- d1: 12 mm
- Weight: 96 g
Material
Spring
- plastic
Pin
- Stainless steel
Notes
This is a discontinued article.
Characteristic
Version heavy spring load = green spring
Assembly
It is recommended to moisten the body.
Installation by pressing in.
Formula for calculating the center distance for the mounting hole:
l0 = z/2 + w + x,
l0 = center distance,
y = workpiece height,
w = workpiece length,
x = coordinate dimension,
s = stroke,
z = stop diameter
Calculation dimension x:
y greater than or equal to l2 - d2/2,
then x = d2/2 - s
(value x for this case see table)
or
y smaller than l2 - d2/2,
then x = d2/2 - s - [(l2 - d2/2 - y) * 0,123]
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863.
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 27.06.2024.
Does not contain Proposition 65 substances
No Proposition 65 substances included.
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.